Buy Leak Detection Systems in Envirotech Alarms Ltd Online Shop
Showing 1–30 of 78 results
-
Valves (3)
A range of solenoid and motorised butterfly valves are available for use with the complete range of Envirotech Alarm panels. Available in sizes between 1/2″ and 8″, there is a valve to suit almost every situation. Envirotech Alarms have normally open, normally closed and latching type valves and will be happy to help you select the correct valve to suit your application. -
Uncategorised (31)
-
Complete Leak Detection Kits (5)
Our complete leak detection packages include everything required for some of the most popular implementations. These include home and basements, comms rooms, commercial kitchens (tea points) and pub cellars. The kit includes not only the alarm panel, sensors, valves and beacons, but also the cables, connectors and fixings, so you know you have everything needed to get up and running as quickly and easily as possible. -
Environmental Alarms (6)
-
Gas Leak Detection (2)
-
Oil Leak Detection (2)
-
Over Temperature Detection (2)
-
Package Pumps (4)
-
Level Alarm Panels (2)
-
Package Pump Kits (1)
-
Telemetry Systems (2)
-
Sewage Treatment (1)
-
SMS Text Dialler (2)
-
Fixed Line Diallers (2)
-
Water Leak Detectors (27)
-
Water Meters (3)
MID and WRAS Approved Water Meters Available for Fast Delivery. Large Stock Held in 15mm to 300mm Sizes Buy direct on-line for quick delivery direct to any UK address. All water meters comply with the European Measuring Instruments Directive 2014/32/EU meaning they are accurate and calibrated to a very high standard. Building energy metering and environmental monitoring can be achieved using our water meters including BREEAM as a method for assessing, rating, and certifying the sustainability of a building. Prices start from as little as £ 61.00 net. All meters are safe for potable water and meet the requirements for billing purposes. -
Flow Based Water Leak Detection (2)
-
Single Zone Water Leak Detection Alarms (2)
Reliable Protection Against Damage From Water Leaks Installing a LeakStop or LeakStopper 1 immediately offers protection against water leaks minimising damage and down time. This simple to install, simple to operate single zone water leak detection alarm uses sensors to detect the presence of water is areas where it shouldn’t be. The LeakStop and LeakStopper 1 come with a range of outputs ideal for connecting to a BMS or solenoid shutoff valves. This leak detection alarm is the preferred solution to protect tea points, small comms rooms, plant rooms and WC areas. Check out our complete solution packages for Tea Points, Comms Rooms and Basement Areas. Our packages include everything required to protect these areas,the alarm panel, the cables and the valve. We also supply multizone water leak detection systems. Envirotech Alarms technical staff are also available on the end of the phone should you wish to speak to us. -
Multi Zone Water Leak Detection Alarms (4)
description here -
BREEAM Water Leak Detection (2)
BREEAM Water Leak Detection Products WAT02 WAT03 The LeakSaver product monitors the flow of water running through a pipe. This system is used to meet the requirements of BREEAM WAT02 (monitor of consumption) and WAT03 (leak Detection). The alarm panel is connected to water meters that send pulses relating to water usage. The panel is programmed with the expected amount of water used based on the type of building, the occupancy and the amount of facilities using water, if the flow of water exceeds this setting an alarm will be triggered. The Leaksaver is a BREEAM water leak detection system which is capable of detecting a major water leak on the mains water supply within the building and between the building and the utilities water meter. It monitors the amount of water passing into the building over a set period of time. Should this amount be exceeded it will create an alarm It is used when there is external pipe work between the boundary and the building. This enables the distinction between a leak outside (usually underground) and one inside the building. The LeakSaver2 can also be used for “Water Monitoring”. The aim of WAT02 is to manage water and encourage reductions in consumption. A pulsed water meter is required on all mains supplies and on the supply to any building using more than 10% of the total water consumption. The LeakSaver connects to the water meter/s and to the Building Management System to monitor the amount of water used. The system has been designed to meet all of the WAT03 requirements for BREEAM water leak detection and prevention, the key points being: An alarm is raised when the flow of water (measured using pulsed water metres) exceeds a pre-set maximum for a pre-set period of time. It is able to identify different flow rates by programming high and/or low levels over different time periods. It is fully programmable to suit the users water consuming requirements and has the ability to avoid false alarms when larger volumes of water are called for. -
Packages for Water Leak Detection (4)
-
Accessories for Water Leak Detectors (8)
-
Sensor Options for Water Leak Detection (5)
-
Options for Water Leak Detection (5)
-
Water Leak Detector Kits (6)
-
LeakTracker 4 Zone
For more zones see our 8 Zone LeakTracker Wireless Water Leak Detection Alarm The LeakTracker wireless water leak detection alarm is the ideal solution for M&E contractors, Property Management Service providers and individual homeowners looking for water leak prevention. Designed to quickly detect water leaks and with easy installation using our unique wireless connectivity, the LeakTracker is the perfect alarm [...]More InformationAdd to basket -
LeakTracker 8 Zone
For fewer zones see our 4 Zone LeakTracker Wireless Water Leak Detection Alarm The LeakTracker wireless water leak detection alarm is the ideal solution for M&E contractors, Property Management Service providers and individual homeowners looking for water leak prevention. Designed to quickly detect water leaks and with easy installation using our unique wireless connectivity, the LeakTracker is the perfect alarm [...]More InformationAdd to basket -
SMS (Telemetry) Diallers
Sends a text message to up to 512 numbers when an EnviroTech Alarm panel goes into alarm. Ideal for using where the main control panel is in an area that is unmanned or there is no out of hours personnel. Easy to configure via a mobile phone, no need to plug into a laptop or PC. Can have up to [...]More InformationAdd to basket -
SMS text dialler for package pump stations
The SMS telemetry alarm for use with package pump stations and septic tanks. Receive an early warning by text that a problem has occurred and avoid unnecessary issues. Monitor liquid levels to ensure that they don’t rise above a critical level by attaching the SMS dialler to a float switch. Link the system to the pump control panel and receive [...]More InformationAdd to basket -
Combined Sounder / Beacon
See our range of external beacon/sounder panels to suit every environment. Designed to work with any Envirotech Alarm panel to offer remote alarm signalling. Great for areas where the audio/visual output on the main panel may not be seen or heard. Powered through the main alarm panel using a 12VDC supply, eliminating the need to use a NICEIC approved electrician. [...]More InformationAdd to basket -
Beacon Only
Ideal for using in environments where noise nuisance could be a problem. The beacon duplicates when any EnviroTech Alarm panel goes into alarm. It is ideal for using where the main control panel is in an area that is unmanned or may not be heard due to excessive noise. Powered through the main alarm panel using a 12VDC supply, eliminating [...]More InformationAdd to basket -
Sounder Only
The Sounder Alarm can be connected to any Envirotech alarm panel, should the master alarm panel detect a leak, the sounder will go off. These panels simply plug straight into any of the Envirotech alarm panels using a 2 core signal cable (or equivalent). As soon as the master panel goes into alarm, a signal is sent straight to the [...]More InformationAdd to basket -
Repeater Panel
Use an Echo Repeater panel when the main alarm panel is in an uncontrolled area and could potentially not be heard. It mimics an alarm condition on the main panel, sounding a buzzer and illuminating a warning light to say that a leak has occurred. Can be used together with any of the Envirotech Alarms leak detection alarm panels. Especially [...]More InformationAdd to basket -
Sensor Tape
Two fine stainless steel conductors are wound around 4 insulated carriers offering one of the most robust yet flexible leak detection tapes on the market. Available in standard 1m, 2m, 5m and 10m lengths it is easy to make up any lengths (max of 100m) to suit the area in which it will be installed. Rather than providing bespoke lengths, [...]More InformationAdd to basket -
15mm Actuated Ball Valve
An electrically actuated ball valve is a standard lever ball valve with an electric motor and gear box mounted above it to allow it to open and close. They offer an unrestricted flow solution for open and closed water control using a 230VAC electrical power supply. Media: Water Pressure range: 0 to 10 Bar max Media temperature: -15°C +100°C max [...]More InformationAdd to basket -
Actuated Ball Valve
An electrically actuated ball valve is a standard lever ball valve with an electric motor and gear box mounted above it to allow it to open and close. They offer an unrestricted flow solution for open and closed water control using a 230VAC electrical power supply. Media: Water Pressure range: 0 to 10 Bar max Media temperature: -15°C +100°C max [...]More InformationView products -
20mm Actuated Ball Valve
An electrically actuated ball valve is a standard lever ball valve with an electric motor and gear box mounted above it to allow it to open and close. They offer an unrestricted flow solution for open and closed water control using a 230VAC electrical power supply. Media: Water Pressure range: 0 to 10 Bar max Media temperature: -15°C +100°C max [...]More InformationAdd to basket -
25mm Actuated Ball Valve
An electrically actuated ball valve is a standard lever ball valve with an electric motor and gear box mounted above it to allow it to open and close. They offer an unrestricted flow solution for open and closed water control using a 230VAC electrical power supply. Media: Water Pressure range: 0 to 10 Bar max Media temperature: -15°C +100°C max [...]More InformationAdd to basket -
Normally Closed WRAS Solenoid Valves
The Water Regulations Advisory Scheme (WRAS) is a conformance mark that demonstrates that an item complies with high standards set out by water regulations official proclamation in 1999 in the United Kingdom. It is enforced in the UK by the water supply companies. WRAS covers all plumbing systems, water fittings, and equipment supplied, or to be supplied, with water from [...]More InformationView products -
LeakSaver
BREEAM (Building Research Establishment Environmental Assessment Method) is well recognised as the construction industry standard for assessing the sustainability credentials of a building. It covers a broad range of environmental and sustainable issues and can be used by designers, developers, architects and managers to demonstrate measures have been taken that ensures their building meets a certain standard. There are essentially [...]More InformationAdd to basket -
PIR Flow Control For WC’s
Automatic Flow Control for WCs BREEAM WAT03 automatic flow control for WC areas. The FlowControl automatic flow control system from Envirotech Alarms is a complete solution for automatically controlling the flow of water into toilet areas. It uses PIR (passive infrared) sensors connected to valves fitted on the main water supplies to the area. When someone enters the toilet, the [...]More InformationAdd to basket -
100mm WRAS Water Meter
DN100 Nominal Diameter 100mm Flow 160 m3/h Max Pressure Rating 16 bar Height: 229mm Length: 250mm Diameter: 220mm IP65 Pulse reader fitted 1:10 or 1:100 pulse rateMore InformationAdd to basket -
125mm WRAS Water Meter
DN125 Nominal Diameter 125mm Flow 250 m3/h Max Pressure Rating 16 bar Height: 257mm Length: 250mm Diameter: 250mm IP65 Pulse reader fitted 1:10 or 1:100 pulse rateMore InformationAdd to basket -
150mm WRAS Water Meter
DN150 Nominal Diameter 150mm Flow 400 m3/h Max Pressure Rating 16 bar Height: 357mm Length: 300mm Diameter: 285mm IP65 Pulse reader fitted 1:10 or 1:100 pulse rateMore InformationAdd to basket -
15mm Latching Solenoid Valve 12VDC
1/2″ BSP Port 15mm Orifice Pressure Rating 0 – 3.5 Bar Max Temp Centigrade 80 Voltage 12 – 24VDC Power Consumption 18Watts IP65 Brass Dimensions 75mm x 85mm x 100mmMore InformationAdd to basket -
15mm Normally Closed WRAS Solenoid Valve 230VAC
WRAS Approved Product 1/2″ BSP Port Zero Lift Pressure Rated 13mm Orifice Pressure Rating 0 – 8.5 Bar Max Temp Centigrade 80 Voltage 230VAC Power Consumption 15Watts IP65 Brass Dimensions 66.5mm x 101mm x 48mmMore InformationAdd to basket -
15mm to 20mm WRAS Approved Water Meters
The Water Regulations Advisory Scheme (WRAS) is a conformance mark that demonstrates that an item complies with high standards set out by water regulations official proclamation in 1999 in the United Kingdom. It is enforced in the UK by the water supply companies. WRAS covers all plumbing systems, water fittings, and equipment supplied, or to be supplied, with water from [...]More InformationView products -
15mm WRAS Water Meter
DN15 Nominal Diameter 15mm Flow 1.6 to 2.5 MPa Max Pressure Rating 1.6MPa Height: 68.5mm Length: 110mm Diameter: 72mm IP65 Pulse reader fitted 1:1 or 1:10 pulse rateMore InformationAdd to basket -
200mm WRAS Water Meter
DN200 Nominal Diameter 200mm Flow 630 m3/h Max Pressure Rating 16 bar Height: 382mm Length: 350mm Diameter: 340mm IP65 Pulse reader fitted 1:10 or 1:100 pulse rateMore InformationAdd to basket -
20mm Latching Solenoid Valve 12VDC
3/4″ BSP Port 20mm Orifice Pressure Rating 0 – 3.5 Bar Max Temp Centigrade 80 Voltage 12 – 24VDC Power Consumption 18Watts IP65 Brass Dimensions 85mm x 60mm x 114mmMore InformationAdd to basket -
20mm Normally Closed WRAS Solenoid Valve 230VAC
WRAS Approved Product 3/4″ BSP Port Zero Lift Pressure Rated 20mm Orifice Pressure Rating 0 – 7 Bar Max Temp Centigrade 80 Voltage 230VAC Power Consumption 15Watts IP65 Brass Dimensions 71mm x 107mm x 58mmMore InformationAdd to basket -
20mm WRAS Water Meter
DN20 Nominal Diameter 20mm Flow 1.6 to 2.5 MPa Max Pressure Rating 1.6MPa Height: 68.5mm Length: 130mm Diameter: 72mm IP65 Pulse reader fitted 1:1 or 1:10 pulse rateMore InformationAdd to basket -
250mm WRAS Water Meter
DN250 Nominal Diameter 250mm Flow 1000 m3/h Max Pressure Rating 16 bar Height: 427mm Length: 450mm Diameter: 400mm IP65 Pulse reader fitted 1:10 or 1:100 pulse rateMore InformationAdd to basket -
25mm Latching Solenoid Valve 12VDC
1″ BSP Port 25mm Orifice Pressure Rating 0 – 3.5 Bar Max Temp Centigrade 80 Voltage 12 – 24VDC Power Consumption 18Watts IP65 Brass Dimensions 100mm x 70mm x 120mmMore InformationAdd to basket -
25mm Normally Closed WRAS Solenoid Valve 230VAC
1″ BSP Port WRAS Approved Product 25mm Orifice Pressure Rating 0 – 7 Bar Max Temp Centigrade 80 Voltage 230VAC Power Consumption 15Watts IP65 Brass Dimensions 96mm x 120.5mm x 70mmMore InformationAdd to basket