Normally Open Solenoid Valves

£126.50£1,551.00 (excl VAT)

A normally open solenoid valve combines a solenoid (electromagnet core) with a valve body containing one or more entry/exit points. Flow through an orifice is shut off or opened by the movement of the electromagnetic core depending on if the solenoid is energized or de-energized.
The core is in a water tight housing. When the solenoid is not powered, the core is open in the valve. When energized, a spring puts the valve to its closed position. The force needed to open the valve is proportional to the valve size and water pressure.

Depending on the size of the valve, will depend on what pressure is required to open or close it. Valves between 1/2″ and 1″ do not require any pressure to open them. These are known as zero lift or zero rated valves. Larger valves (above 1″) do require a small amount of pressure in order to operate (0.5bar). This is the differential in pressure between the input side and the output side of the valve. If the pressure is the same on both sides the valve will fail to open/close.

£126.50 (excl VAT)
£159.50 (excl VAT)
£183.70 (excl VAT)
£302.50 (excl VAT)
£302.50 (excl VAT)
£407.00 (excl VAT)
£1,501.50 (excl VAT)
£1,551.00 (excl VAT)

    Request More Information


    Commonly called 2/2 (2 way/2 position) valves, the normally open solenoid valve has a single inlet and a single outlet allowing installation into a pipe and shut off the fluid within it. Normally open refers to the valve being open when no power is presented to it and conversely requires a voltage to energise the coil in order for it to close. Available in sizes between 1/2″ (15mm) and 3″ (80mm) requiring a 230VAC supply (other voltages are available).

    Ideal for applications where there isn’t a requirement for the valve to stay shut for long periods of time.

    Widely Installed In