SMS DIALLERS NEW

SMS (Telemetry) Diallers

The SMS telemetry alarm for use with package pump stations and septic tanks.  Receive an early warning by text that a problem has occurred and avoid unnecessary issues.  Monitor liquid levels to ensure that they don’t rise above a critical level by attaching the SMS dialler to a float switch.  Link the system to the pump control panel and receive a text alert should a pump fail.  Where an air compressor or air blower is used in a sewage treatment plant it is possible to install a pressure switch on the air supply line and monitor for loss of air.  There are 2 versions of the SMS (telemetry) Dialler:

The 4 channel version is a capture all alarm capable of connecting to a float switch, pump fail (x2) and a pressure switch.  Each input can be set to have a different text message to alert the recipient as to what the problem is.  The 2 channel version is a basic system that can be used in situations where only high level monitoring is important for instance.  Typically this would be used on smaller package pump stations and connects to a float switch.

sms dialler with beacon - new model

All the SMS diallers have an internal relay in them.  This can be used to connect to an external device such as a beacon or sounder.  It can also be intregrated into the pump control panel and is used to alert to a power fail.  In the event of a power out, the SMS alarm can send a text message, should the power return after a short period of time, a second message will be sent to say all is OK.  This is especially useful if an area is particularly prone to frequent short power cuts as only extended loss of power could cause a problem.

Both the 4 and 2 channel versions have the capacity to send text messages to as many as 512 different numbers.  They come in 230VAC and 12VDC versions and can easily be incorporated into a control panel or used as a stand alone alarm monitoring system.

All settings are done by sending simple text messages to the SMS dialler, as few as 6 messages can have the system up and running in no time at all.  This intuitive easy setting makes the system perfect for the end user to set-up and modify or an your engineer to make changes from anywhere in the UK.

The alarm panels use all mobile networks and require either a Pay As You Go or contract SIM.  These are simply inserted into the card holder, a device attached such as a float switch and the power connected to have the system ready for action.

Should a situation occur that triggers an alarm, the SMS dialler will registar which input the alarm is on (high level, pressure loss etc.) and send an appropriate message to the specified numbers listed.

SMS Diallers,Product Features

  • 2 and 4 channel versions.
  • Can be used for high level monitoring
  • Detects air pressure loss.
  • Used for pump fail detection.
  • External beacons and sounders available.
  • Everything available from Envirotech Alarms.
  • Battery backup options.
  • Additional relay options.

FOR PRICES OR EXPERT ADVICE ABOUT OUR RANGE OF SMS TEXT DIALLERS, PLEASE CALL 0330 1595933 OR USE THE CONTACT FORM

Below are a few examples of where and how Envirotech oil, gas and water Leaksaver systems have been used.