Water Meters

Water Meters for Monitoring Usage and Leak Detection

The range of water meters supplied with the LeakSaver product are calibrated to accurately output the amount of water flowing into a building in order to measure the consumption (BREEAM WAT02) and also determine if there is a water leak (BREEAM WAT03).
water meter in pipe

Envirotech Alarms sell a range of high quality reliable water meters to work both with the LeakSaver alarm panels and as independant energy monitoring devices.  All water meters come with pulse output readers attached as standard that send a signal directly to a BMS or to another data logging device that equates to a volume of water.

Fitted with a pulse reader as standard with outputs of 1 pulse to 1 litre of water and 1 pulse to 10 litres of water the pulse is read by the LeakSaver panel. The pulses are fed through a pulse splitter allowing simultaneous connection to a BMS for monitoring consumption and also as a reference against which a leak can be detected. By telling the LeakSaver what the expected water usage will be for the building (this can be set at different levels for different times of the day) and comparing the pulses from the water to meter to this, any amount that exceeds this will trigger an alarm.

Small Water Meter V1.0

Product Features:

  • Available in sizes between 15mm (1/2″) and 200mm (8″)
  • WRAS Approved
  • Pulses readers available in 1:1, 1:10 and 1:100
  • Screw fittings and flange fittings
  • Compatible with LeakSaver alarm panels for BREEAM WAT0/2WAT03

FOR PRICES OR EXPERT ADVICE ABOUT OUR RANGE OF WATER METERS, PLEASE CALL 0330 1595933 OR USE THE CONTACT FORM

Below are a few examples of where and how Envirotech oil, gas and water Leaksaver systems have been used.