Build a bespoke water leak detection system by configuring the optional sensor tape, probes, pads and valves required. You can also select from a range of sounders and beacons along with SMS text alerts for remote systems. While choosing your options you’ll see the price being adjusted towards the bottom of the page.
Using the LeakStop alarm panel as the start, add connection cable and a connection fixing kit when ordering the sensor tape. Add to this a valve to suit the pipework that will need to be isolated in the event of a leak being detected. Alternatively, a sensor probe might be better suited for your environment, in which case add connection cable and the number of sensor probes required. The downloadable LeakStop Product Information PDF explains how the system goes together and what sensor is best suited to which environment.
If waters detected the alarm panel will trigger an internal sounder and an LED will start to flash. There is also valve switching as standard and a second volt free relay that will switch an external device or signal to a BMS when water has been detected.