Single Zone Water Leak Detection Alarms

Tea point leak detection kit

This kit includes a LeakStop water leak detector alarm panel, a 3m connection cable with a factory fitted socket, a 3m length of sensor tape and floor clips to hold the sensor tape in position. You can add a shut-off valve that will automatically switch off the water supply in the event of a leak.

The sensor tape is usually installed under the kick board under the sink unit. This protects the pipe work feeding the taps as well as covering the waste from the sink. Should a leak occur, water will drip onto the sensor tape and immediately trigger an alarm. As soon as an alarm occurs, the LeakStop panel will emit an audible and visual alarm and if fitted switch off the water to the area by automatically closing the solenoid valve.

The Tea Point leak detection package includes everything required and the only additional requirement is a connection to a 230V AC supply.

Although the Tea Point leak detection kit covers most Tea Point areas, we understand that sometimes longer lengths of sensor tape are needed.  Additional sensor tape can be ordered to account for this.

Single zone water leak detection

Envirotech Alarms have over 30 years combined experience in providing water leak detection solutions. The LeakStop range offers entry level protection for smaller applications such as Tea Points and basement areas. There is a dedicated relay output for connecting to a valve as well as a volt free relay that can be used for the BMS or other external device such as a beacon or SMS dialler, the LeakStop range does not come with a battery backup. The LeakStopper 1 has been developed for more commercial appications such as larger comms rooms, plant rooms and office toilet blocks. It has a battery backup as standard as well as two 8 amp volt free relays, line fault monitoring and power fail signalling.

Both water leak detection alarms are used for applications that require immediate action when a leak occurs. They can both be used with a sensor tape, probe or pad (or a combination of these) to alert that a leak has occurred as soon as water touches them. The sensors can be used in awkward and hard to get to locations where a water leak may otherwise go unnoticed for a long period of time. Many locations need to cover an area (usually where the pipes run) and sensor tape can be used to track underneath these offering 100% coverage.

Envirotech Alarms offer a number of outputs as standard making the  LeakStopper 1 the most flexible, cost effective systems on the market.  Or find out about our multizone detectors here.

Single Zone Water Leak Detector Features: